Overview
The BMW R 12 nineT 2025 is a new heavy bike that comes with a Air/oil-cooled two-cylinder Engine, 1,170 cc Displacement, 109 hp at 7,000 rpm Power, 134 mph Top Speed, Aluminum cast wheels, Disc front Brake, Disc rear Brake, and Tubular space Frame.
|
Brand |
BMW |
|
Model |
R 12 nineT 2025 |
|
Status |
Available |
|
Release Date |
2024 |
|
Full specs and features |
|
|
Engine Type |
Air/oil-cooled two-cylinder, four-stroke boxer engine with two overhead camshafts, four radially arranged valves and central counterbalance shaft |
|
Bore x Stroke |
101 mm x 73 mm |
| Displacement |
1,170 cc |
|
Rated output |
109 hp at 7,000 rpm |
|
Max. torque |
85 lb-ft at 6,500 rpm |
|
Compression ratio |
12.0 : 1 |
|
Mixture control |
Electronic intake pipe injection / digital engine management system: BMS-O with throttle-by-wire |
|
Emission Control |
Closed-loop 3-way catalytic converter |
|
Maximum speed |
134 mph |
|
Fuel type |
Super unleaded (max. 15% ethanol, E15), 95 ROZ/RON, 90 AKI |
|
Alternator |
Permanent magnet alternator with 660 W (nominal power) |
|
Battery |
12 V / 10 Ah |
|
Clutch |
Single-disc dry clutch, hydraulically operated |
|
Gearbox |
Constant-mesh 6-gear gearbox with separate transmission housing |
|
Drive |
Cardan shaft drive |
|
Frame |
Tubular space frame |
|
Front wheel location / suspension |
Upside-down fork, diameter 45 mm, spring pre-load adjustable, rebound and compression adjustable |
|
Rear wheel location / suspension |
Cast aluminum single-sided swing arm with Paralever brace, central progressive spring strut, spring pre-load adjustable, rebound damping adjustable |
|
Suspension travel, front / rear |
4.7" / 4.7" |
|
Wheelbase |
59.5” |
|
Caster |
4.35" |
|
Steering head angle |
62.3° |
|
Wheels |
Aluminum cast wheels |
|
Rim dimensions, front |
3.50 x 17" |
|
Rim dimensions, rear |
5.50 x 17'' |
|
Tire, front |
120/70 ZR17 |
|
Tire, rear |
180/55 ZR17 |
|
Brake, front |
Twin disc brake, floating brake discs, diameter 310 mm, 4-piston Monobloc radial brake caliper |
|
Brake, rear |
Single disc brake, diameter 265 mm, 2-piston floating caliper |
|
ABS |
BMW Motorrad Integral ABS (partial integral) |
|
Seat height |
31.3” |
|
Inner leg curve |
69.5” |
|
Usable tank volume |
4.2 gal. |
|
Reserve |
0.9 gal. |
|
Length |
83.8" (over rear wheel) |
|
Height (excl. mirrors) |
42.12" (without mirror) |
|
Width (excl. mirrors) |
34.3" (above hand lever) |
|
Unladen weight, road ready, fully fueled |
485 lbs 1) |
|
Permitted total weight |
948 lbs |
|
Payload (with standard equipment) |
465 lbs |
Rate it