Overview
The BMW S 1000 R 2024 is a new heavy bike that has a 999 cc Engine, 165 hp at 11,000 rpm Power, 12.5:1 Compression ratio, 12 V / 8 Ah, maintenance-free Battery, 57.0-inch Wheelbase, Aluminum Wheels, Disc front Brake, Disc rear Brake, and 32.7 Seat Height.
Brand |
BMW |
Model |
S 1000 R 2024 |
Status |
Available |
Release Date |
2023 |
Full Specs |
|
Type |
Oil/water-cooled four-cylinder four-stroke in-line engine with four valves per cylinder |
Bore x stroke |
80 mm x 49.7 mm |
Capacity |
999 cc |
Rated output |
165 hp at 11,000 rpm |
Max. torque |
84 lbs-ft. at 9,250 rpm |
Compression ratio |
12.5 : 1 |
Mixture control / engine management |
Electronic port fuel injection, BMS-K+ electronic engine management with RPM cut-off, twin-spark ignition: BMS-O with ride by wire. |
Emission control |
Regulated three-way catalytic converter |
Maximum speed |
Over 124 mph |
Fuel type |
Unleaded Premium |
Alternator |
Permanent magnet generator with 450 W (nominal capacity) |
Battery |
12 V / 8 Ah, maintenance-free |
Clutch |
Multi-disc oil bath (anti-hopping) with self-reinforcement |
Gearbox |
Synchromesh six-speed gearbox, built into engine housing |
Drive |
Chain 525 17/45 |
Traction control |
DTC |
Frame |
Bridge-type aluminum laminate frame with load-bearing engine |
Front wheel location / suspension |
Upside-down telescopic fork with a diameter of 1.8”, spring preload and adjustable rebound and compression stage |
Rear wheel location / suspension |
Aluminum swingarm, central shock absorber, adjustable rebound and compression damping and adjustable spring preload |
Suspension travel front / rear |
4.7”/ 4.6” |
Wheelbase |
57.0” |
Caster |
3.8” |
Steering head angle |
65.8° |
Wheels |
Cast aluminum |
Rim, front |
3.50 x 17" |
Rim, rear |
6.00 x 17" |
Tires, front |
120/70 ZR 17 |
Rear tires (with M wheels) |
190/55 ZR 17 (200/55 ZR 17) |
Brake, front |
Twin-disc brake with a diameter of 12.6”, four-piston fixed caliper |
Brake, rear |
Single disc brake with a diameter of 8.7”, one-piston floating caliper |
ABS |
BMW Motorrad Integral ABS, partial integral |
Length |
82.3” |
Width |
31.9” |
Height (excl. mirrors) |
43.9” |
Seat height, unladen weight |
32.7” (OE seat low: 31.9”, OE seat high: 33.5”) |
Inner leg curve |
72.2” (OE low seat: 71.4”, OE high seat: 73.1” ) |
Unladen weight, road ready, fully fueled |
438.7 lbs. (with M Package including M Carbon Wheels: 427.7 lbs.) 1) |
Permitted total weight |
899.4 lbs. |
Payload (with standard equipment) |
458.5.lbs. |
Rate it