|
Brand |
Aprilia |
|
Model |
RSV4 1100 2023 |
|
Status |
Available |
|
Release Date |
2022 |
|
ENGINE TYPE |
Aprilia 4 longitudinal 65° V4 cylinder, 4-strokes, liquid cooling system, double overhead camshaft (DOHC), four valves per cylinder |
|
BORE AND STROKE |
81 x 53.32 mm |
|
TOTAL ENGINE CAPACITY |
1.099 cc |
|
COMPRESSION RATIO |
13.6:1 |
|
MAXIMUM POWER AT CRANKSHAFT |
217 HP (159.5 kW) at 13,000 rpm |
|
MAXIMUM TORQUE AT CRANKSHAFT |
125 Nm at 10,500 rpm |
|
POWER SUPPLY |
Airbox with front dynamic air intakes. 4 Marelli 48-mm throttle bodies with 8 injectors and Ride-By-Wire engine management. |
|
TRANSMISSION |
6-speed cassette type gearbox Gear lever with Aprilia Quick Shift electronic system (AQS) |
|
CLUTCH |
Multi plate wet clutch with mechanical slipper system |
|
PRIMARY DRIVE |
Straight cut gears and integrated flexible coupling, drive ratio: 73/44 (1,659) |
|
SECONDARY DRIVE |
Chain: Drive ratio: 41/16 (2,562) |
|
CONTROLS MANAGEMENT |
APRC system (Aprilia Performance Ride Control) that includes engine maps (AEM), engine brake control (AEB), traction control (ATC), wheelie control (AWC), launch control (ALC), cruise control (ACC), speed limiter (APT). 6 riding modes (3 Road, 3 Track) |
|
CHASSIS |
Sachs steering damper |
|
FRONT SUSPENSION |
Sachs fork  43 stanchions, adjustable compression and rebound, travel 127 mm |
|
REAR SUSPENSION |
Sachs monoshock adjustable in: hydraulic compression and rebound damping and spring pre-load, 130 mm travel |
|
BRAKES |
Front: Dual 330-mm diameter floating stainless steel disc with lightweight stainless steel rotor and aluminium flange with 6 pins. Brembo Stylema® monobloc radial callipers with 4  30 mm opposing pistons. Sintered pads. Radial pump and metal braided brake hose Rear: 220 mm diameter disc; Brembo calliper with two  32 mm separate pistons. Sintered pads. Pump with integrated tank and metal braided hose Bosch ABS with cornering function and 3 map settings, equipped with RLM (Rear wheel Lift-up Mitigation) strategy |
|
WHEELS |
Aprilia in aluminium alloy wheels with 3 split spoke design Front: 3.5”x17” Rear: 6”x17” |
|
TYRES |
Radial tubeless. front: 120/70 ZR 17 rear: 200/55 ZR 17 (alternative: 190/50 ZR 17; 190/55 ZR 17) |
|
DIMENSIONS |
Wheelbase: 1435.8 mm Length: 2055 mm Width: 735 mm Saddle height: 845 mm Headstock angle: 24.6° Trail: 104.5 mm |
|
KERB WEIGHT |
202 kg (90% fuel) |
|
EMISSIONS COMPLIANCE |
Euro 5 |
|
CONSUMPTION |
6.90 litres/100 km |
|
CO2 EMISSIONS |
160 g/km |
Rate it