aprilia rsv4 factory e5 2024

Brand

Aprilia

Model

RSV4 Factory E5 2024

Status

Available

Release Date

2023

Full Specs

ENGINE TYPE

Aprilia 4 longitudinal 65° V4 cylinder, 4-strokes, liquid cooling system, double

overhead camshaft (DOHC), four valves per cylinder

BORE AND STROKE

81 x 53.32 mm

TOTAL ENGINE

CAPACITY

1.099 cc

COMPRESSION RATIO

13.6:1

MAXIMUM POWER AT

CRANKSHAFT

217 HP (159.5 kW) at 13,000 rpm

MAXIMUM TORQUE AT

CRANKSHAFT

125 Nm at 10,500 rpm

POWER SUPPLY

Airbox with front dynamic air intakes. 4 Marelli 48-mm throttle bodies with 8

injectors and Ride-By-Wire engine management.

TRANSMISSION

6-speed cassette type gearbox

Gear lever with Aprilia Quick Shift electronic system (AQS)

CLUTCH

Multi plate wet clutch with mechanical slipper system

PRIMARY DRIVE

Straight cut gears and integrated flexible coupling, drive ratio: 73/44 (1,659)

SECONDARY DRIVE

Chain: Drive ratio: 41/16 (2,562)

CONTROLS

MANAGEMENT

APRC system (Aprilia Performance Ride Control) that includes engine maps

(AEM), engine brake control (AEB), traction control (ATC), wheelie control

(AWC), launch control (ALC), cruise control (ACC), speed limiter (APT). 6

riding modes (3 Road, 3 Track)

CHASSIS

Aluminium dual beam chassis with pressed and cast sheet elements

Available adjustments: headstock position and angle, engine height,

swingarm pin height

Smart EC 2.0 electronically managed Öhlins steering damper

FRONT SUSPENSION

Smart EC 2.0 electronically managed Öhlins NIX fork.  43 mm stanchions,

with TIN surface treatment Aluminium radial calliper mounts, adjustable in

hydraulic compression and rebound damping and spring pre-load, 125 mm

travel

REAR SUSPENSION

Upside-down double braced aluminium swingarm;

Öhlins TTX monoshock with Smart EC 2.0 electronically managed piggyback, fully adjustable in: spring pre-load, wheelbase and hydraulic

compression and rebound damping. 115 mm travel

BRAKES

Front: Dual 330-mm diameter floating stainless steel disc with lightweight

stainless steel rotor and aluminium flange with 6 pins. Brembo Stylema®

monobloc radial callipers with 4  30 mm opposing pistons. Sintered pads.

Radial pump and metal braided brake hose

Rear: 220 mm diameter disc; Brembo calliper with two  32 mm separate

pistons. Sintered pads. Pump with integrated tank and metal braided hose

Bosch ABS with cornering function and 3 map settings, equipped with RLM

(Rear wheel Lift-up Mitigation) strategy

WHEELS

Forged aluminium alloy wheels, completely machined, with 5 split spoke

design.

Front: 3.5”x17”

Rear: 6”x17”

TYRES

Radial tubeless.

front: 120/70 ZR 17

rear: 200/55 ZR 17 (alternative: 190/50 ZR 17; 190/55 ZR 17)

DIMENSIONS

Wheelbase: 1435.8 mm

Length: 2055 mm

Width: 735 mm

Saddle height: 845 mm

Headstock angle: 24.6° Trail: 104.5 mm

KERB WEIGHT

202 kg (90% fuel)

EMISSIONS

COMPLIANCE

Euro 5

CONSUMPTION

6.90 litres/100 km

CO2 EMISSIONS

160 g/km

FUEL TANK CAPACITY

17.9 litres (including 4-litre reserve)

COLOUR RANGE

Lava Red, Aprilia Black